Materials for Laser Cutting & Engraving
Since 1999, Laser Alliance has been a premier laser cutting and engraving for San Jose, Santa Clara and other Bay Area cities.
We are known by many clients in this field, exemplifies how our advanced laser systems can adeptly handle a wide range of materials with remarkable accuracy and efficiency.
List Materials We Cut:
Plastic:
- Acrylic, up to 1″ thick
- Acetal, up to 1/2″ thick
- Corroplast
- Corian, up to 1/2″ thick
- Delrin, up to 1/2″ thick
- 3Form, up to 1/2″ thick
- EPDM, up to 1/2″ thick
- Fabric runners
- Fiberglass
- Garolite G-10
- FR-10
- Magnetic
- Laminate
- Latex
- Melamine
- Mylar
- Polyester
- Polyethylene
- Polycarbonate, up to 1/4″ thick
- Polypropylene, up to 1/2″ thick
- Polystyrene
- Polyurethane
- High Density
- Polyethylene
- Teflon
- Santoprene
Metals:
- Aluminum, up to 3/16″
- Anodized aluminum
- Galvanized steel, up to 1/4″
- Mild steel, up to 1/4″
- Spring steel
- Stainless steel, up to 1/8″
- Titanium, up to 1/8″
Foam:
- Closed cell
- Neoprene
- Open cell
- Polyurethane
Paper & Fiber:
- Cardboard
- Chip board
- Felt
- Fabric
- Fish paper
- Hard fiber paper, electrically insulating
- Matboard
- Museum board
Wood:
- Balsa wood, up to 1/2 ″ thick
- Basswood, up to 1/2″ thick
- Lauan plywood
- Masonite, up to 1/4″ thick
- MDF, up to 1″ thick
- MDO, up to 3/4″ thick
- Plywood, up to 1″ thick
- Plyboo, up to 1″ thick
- Cork, up to 1/4″ thick
- Hardwood: Alder, Ash, Aspen,Beech, Cedar, Cherry, Chestnut, Cotton Wood, Cypress, Elm, Fir, Hickory, Holly, Ironwood, Ipe, Magnolia, Mahogany, Maple, Pine, Poplar, Rosewood, Spruce, Teak, Walnut, Willow, Zebrawood
- Ultralight MDF
Rubber:
- Buna-N
- Butyl Rubber
- ECH Rubber
- EPDM
- Fluorosilicone Rubber
- Neoprene
- Nitrile Rubber
- Poron
- PTFE
- Silicone
- Viton